Тепл.подклад 80x80

Thermal impedance: 0.04 C-cm2/W Phase change temperature: within 45℃ Storage method: refrigerated storage Scope of application: heat transfer of electronic components Method: attached to the surface of the heating or radiator Size: 80*80*0.2mm Weight: 10 grams This product is a phase change material. During air transport, cabin and climate may slightly deform edges, not affecting use. If you cannot accept it, do not buy. Thoroughly clean the chip surface and heat sink contact surface with alcohol wipes. Important: if attaching to a chip surface, cut to chip size or slightly smaller by one edge; edges must be firmly attached. If on a radiator base, use a circle larger than the chip to align, avoiding protrusions. Edges must not suspend to allow peeling. Peel one release film side and stick to radiator base or chip surface. If room temp is high, refrigerate 10 minutes before peeling. Press evenly with thumb to seal. Peel the other film side. Start from corners for ease. Install and tighten the radiator, then use. Note: color may vary by monitor light. Allow 1-2 cm measurement difference. PTM7950 Thermal Interface Material Phase Change 8.5W/mK for CPU Features: Certified Reliability: 1000-hour bake and 1000 thermal cycles validation. High-grade Conductivity: 8.5W/mK for rapid heat transfer, reducing throttling. Slim-profile: 0.2mm for dense electronics. Desktop And Laptop Use: fits laptop heatsinks and desktops. Computer Cooling Core: bonds to heatsink bases and chip surfaces for stable thermal coupling. 1x PTM7950 Thermal Pad 10 x Easy Peel Stickers 1 x Cleaning Brush 1 x Cleaning Pack 1 x Scraper 5 x Finger Cots 1 x Screwdriver