Молд для дорожки, садовый бетон, плитка и камень

Booth construction design staff; Advertising company that temporarily sets up a set because of the need for advertising photography; How to use: Step 1: Mix the cement with water according to the packing instructions. When ready for use, the concrete will be the consistency of the oatmeal and thick enough to hold the edges when cut with a shovel. Step 2: Fill the paver, plow the concrete with a shovel and make sure to fill for EACH area. Step 3: Use rubber gloves to spread the concrete around the and fill any or low points. Tap the by hand to remove any air bubbles. Step 4: Smooth the concrete according to the CONTOUR of the and wipe off the excess. Step 5: Allow the concrete to set up to five minutes and carefully remove the . For the next stretch, rotate the a quarter turn and place it next to the paver you just finished. If you are creating a curved path, tilt it slightly. Step 6: After allowing the concrete to solidify overnight, fill the crack with dirt and rinse off the excess. Wet the ground around the newly formed paver to help them settle. Specifications: Material: for PP resin Size: 40*40*4cm/15.7*15.7*1.58" Notes: There may be slight size deviations due to manual measurement, different measuring methods and tools. The picture may not show the actual color of the item because of different photographing light, angle and display monitor. 1 X Garden Path Maker